5 Things to Avoid When Using LED Grow Lights

Here are the common mistakes indoor growers make with LED lights.

5 Things to Avoid When Using LED Growth Lights

If you’re a first-time grower, making mistakes when growing is unavoidable. Plus, errors are part of the learning process. However, to save you time and money, it’s best to know which ones to do and which ones not to do. The usage of LED lights, in particular, also have some fair share of do’s and don’ts. And with that said, here are some of the common mistakes to avoid to grow healthy plants.

Placing the lights too near or too far

Your plants will suffer from too much heat if your LED grow lights are placed too near. Some of the signs to check is when the outside of the leaves start to turn brown and when they start curling up. If the lights are placed too far, the plants won’t be getting the proper light they need. Most growers would say that the recommended distance from lights to plants are about 12 to 18 inches.

Not adjusting the lights

When your plants grow, they, of course, grow taller. Some growers, believe it or not, forget about this. That said, keep in mind to adjust the height of your lights, keeping them at the recommended distance. Otherwise, you’ll get burnt leaves and efforts go down the drain. Expert growers recommend rotating your plants from time to time to avoid the leaves from leaning towards the light.

Insufficient light for the volume of your plants

Always consider the number of plants you are growing and the amount of LED wattage that you’ll need for them. You have to make sure that you have sufficient lighting. Otherwise, proper photosynthesis will not happen and will result in sad, unhealthy plants. Note that the average LED grow light emits about 32 watts to cover 1 square foot for flowering. So if you have four plants in a 4 x 4 grow space, the recommended LED wattage is 128.

Choosing the wrong spectrum

As mentioned, plants need sufficient lighting for proper photosynthesis to occur. With that said, you have to select the correct setting for each stage of your plant’s growth. Vegetative stage requires more light from the cool blue spectrum, while the flowering stage needs more of the warm red spectrum. Interchanging the two will hinder the plant’s development.

Not cleaning and maintaining your LED lights.

LED growth lights as you know are not cheap and are a huge investment. That said, they need to be taken care of properly and regularly maintained. Clean the lights correctly to save you the hassle of damaging them. Expert growers also recommend using a power stabilizer to equalize the incoming voltage, protecting the LEDs’ chips.

Need more LED lights for a grow space that is getting bigger? Shop at ChampionLED.com!

 

Leave a Reply

Your email address will not be published. Required fields are marked *